· All associates must be fully and properly educated and trained to use the equipment which they are inspected to produce results with.
·
When
operating, always follow manufacturer’s guidelines, as well as always exercise
caution and care.
·
Maintenance
shall only be performed by adequately trained personnel, i.e. engineering staff
and/or equipment supplier.
·
All
equipment required cleaning and correct storage
·
All
equipment should be checked and inspected for damage on a regular basis to
prevent major breakdowns.
·
The
scheduling of maintenance should be based on the frequency of usage.
Vacuum Cleaners
Vacuum
cleaners will give maximum cleaning efficiency when they are maintained well.
The wheels of the machine need to be oiled periodically. After use, dust bags
should be checked and emptied. If the machine operated with the dust bags full
cleaning will not be efficient. The machine may heat up too much, and the bags
get damaged. Wipe the casing daily and check the hose and flex before use.
Buckets
The
buckets should be washed, rinsed, and dried. The squeegee should be wiped clean
and replaced when necessary. The hose need to be rinsed out, the casing and
wheels whipped, and the filter checked after use
Floor Polishers
·
The
Brushes and pads should never be left on the machine after cleaning. The
brushes should be detached after cleaning. The fluff should be removed from
them before washing. Wash rinse and dry wet ones after use.
·
The
pads should be washed, rinsed, and dried thoroughly.
·
The
tanks should be emptied washed and dried. The wheels and casing should be wiped
after use. The wheels need oiling periodically. The flex should be checked for
any fraying before use
Brooms
Brooms
should be shaken free of dust and fluff. Never store them standing on their
bristles, or the bristles will bend out of shape, resulting in inefficient
cleaning. Store brooms either lying horizontally or hanging bristles downward.
Brushes
Brushes
should be gently tapped on hard surfaces to loosen dust and debris after the
cleaning process. Frequent washing with water is avoidable since the brushes
may lose some of their stiffness in this way.
Caddy
After
each shift, they must be cleaned and topped up with replacement supplies for
use in next shift.
Post a Comment (0)